Frequently encountered Used Electric Car failures and their solutions
October 19, 2024
1. What to do if the car does not move after being fully charged: When you think that the
Used Car has been fully charged, but the car does not move after starting,
Solution: Check whether the power indicator is fully charged, and secondly, check whether there is noise during operation. If the noise is very loud, it may be a problem with the motor or the control board. This requires choosing a regular
Used Electric Car repair shop WeChat or replacing new parts.
2. Sometimes when driving an Used Car out, you find a "squeak, squeak" noise, how to deal with it
Solution: This situation may be caused by a problem with the rear axle of the car. Check whether the rear axle of the car is loose and whether the screws are loose. Then try your best to tighten the rear axle of the car and tighten the screws.
3. What to do if you find that the brakes do not stop when you step on them
Solution: In order to reduce costs, some Used Car manufacturers choose low-end Chinese accessories, such as low-end brand brake systems, which are naturally unstable. If you step on the brakes when driving an Used Car, but the car cannot stop, you should not be afraid of danger and immediately turn off the Used Car's power door lock, which is actually the key lock. Of course, this works on flat roads. If it is on a steep slope, the car will run down due to inertia even if it is turned off.
