1. Regular charging and maintenance
Regular charging and maintenance of low-speed
Used Electric Car can effectively reduce battery damage caused by power loss, and can improve the performance indicators of the entire
Used Car. When not in use for a long time, it is also necessary to recharge and maintain the battery every one month. If it is inconvenient to fully charge and discharge, you can fully charge the battery below 10%, which can also play a certain role.
2. Pay attention to tire pressure
When the tires of low-speed Used Car are kept at a higher air pressure, it will not only reduce the shaking level during driving, remove the discomfort caused by objects such as stones, but also reduce the dynamic friction coefficient between the tires and the road surface, thereby increasing The effect of mileage.
3. Pay attention to the battery operating temperature
Keep the battery at 0-40 degrees Celsius as much as possible. High or low temperatures will affect the battery cells, especially if the temperature is too high for a long time.
4. Regular maintenance and lubrication standards
Although the mechanical system of low-speed Used Car is much simpler than that of
fuel vehicles, better lubrication standards are still a prerequisite for comfortable, environmentally friendly, energy-saving, and safe driving.
5. Try to keep the vehicle at a medium to low speed and drive at a constant speed, so that the motor can work in the best efficiency range. Driving too fast will lead to excessive current, which will reduce the efficiency of the power system; while driving too slowly, although the efficiency will increase, the time to travel the same distance will also be longer. After the Used
Electric Car starts to accelerate to a certain speed, you can properly relax the accelerator pedal to maintain the current speed.
6. To minimize rapid acceleration and deceleration, it is best to use the energy recovery system of Used Electric Car. By reducing the number of light brakes, it helps the vehicle recover more kinetic energy. Large-scale development in a short period of time will reduce the capacity of the battery and cause damage to the control panel and brake parts of the new energy Used Electric Car. Therefore, when driving new energy Used Electric Car on a daily basis, the emergency stop of
New energy vehicles should be reduced.
7. Drive fast and close the windows. Although the vehicle speed is used to save electricity when traveling in the city, there are still ways to reduce electricity consumption when driving at a fast speed, such as on a highway. By closing the aluminum doors and windows tightly to avoid frictional resistance in the fast state, it can also reduce wind noise.
8. Avoid driving on the ground with poor ground conditions. Whenever possible, try to choose a route with better ground conditions. This can not only reduce the rolling resistance and save some power consumption, but also enable you to have a better riding experience and prolong the service life of the Used Electric Car.
